Installation and debugging of sand machine to pay attention to details

Sand maker is a wide range of applications, machinery and equipment transported to the post, after consultation between the two sides time, mountain sand American machine will be assigned to carry out installation and commissioning; but for some customers want to install it yourself, then we hereby remind you manager: installation and commissioning process to carefully read the installation instructions, while paying attention to the eight steps:

1, in the installation, the installation must first of all have a very understanding of Sand maker, such as structure, performance, etc.. Then determine the appropriate installation process and process according to the situation.

2, in the installation of the first we must have the lifting equipment, there is no such a large crane equipment can not be normal installation success. Before the fixed equipment, me first to seriously check the equipment of the reserved space is enough, then check the anchor bolt reserved hole of the coordinate of the position. Equipment of longitudinal and transverse coordinate basis (vertical and horizontal curve) respectively is equipment of the center line and the axis line of the rotor, the reserved space and anchor bolt reserved hole center set difference should not exceed plus or minus 10 mm.

3, equipment and foundation should be filled with absorbing materials, to prevent it is put into production is the basis of equipment is not strong, so as to affect the progress of the work.

4, installation of the body, a straight face, body and foundation of the intersecting planes not anchor bolts should be fastened repeatedly, infrastructure should be enough space for the installation of a transport device and equipment maintenance.

5, Sand maker motor installation is completed, should be based on the actual situation of the installation, equipped with a protective cover.

6, plate hammer on the rotor sometimes radial on dynamic gap, so after the new machine is used for the first time counterattack plate frame and hammer the gap width must ensure that no less than 20mm, to ensure that the plate hammer and the rear frame are unlikely to collide.

7, the back plate and the plate hammer of the gap between the need to gradually adjust the small, red star heavy industry proposed to adjust the number of rotor rotation, check whether the impact. After adjusting the lock sleeve nut, to prevent the back plate from the vibration of the screw loose and gradually decreased with the plate hammer collision.

8, the production of Sand maker in the lower part of the material, the installation height and how to feed and feed device, all should be in the installation process to realize the full consideration.

Shanghai sanme is a leading manufacturer of crushing and screening equipments in China, a Sino-German joint venture holding company. We not only can offer full range of crushing and screening equipments, including jaw crusher, cone crusher, impact crusher, Vertical Shaft Impact Crusher, screen, fine sand recovery, mobile crushing and screening plants, but also provide total solutions.

How will Sand Making Machine Develop in the Future?

It’s well known that the sand making industry is moving forward in a positive direction and the sand making machine has become a new device combing both traditional and modern characteristics.

The sand making machine is considered as the most important equipment to crush and grind all kinds of soft and hard stones and minerals. It’s widely used to process minerals, cement, fire proofing, glass materials and construction materials. The high working efficiency of the sand making machine has made the equipment very popular among customers.

The sand making station has very strict standard of the productivity and the hardness of the sand starts to catch users’ attention in the construction industry. If there is no available high efficient sand making machine for customers, it’s not possible to realize the complete satisfaction of the demand for the construction sand.

For many years, the natural sand lacking problem has forced the sand making industry to take measures to change the current lagging developing situation. In addition, the requirement for a large amount of sand in the national infrastructure construction will also encourage the mining machinery industry to take further steps.

China is famous for the abundant quantity of natural resources like sand and stones which will provide enough raw materials for the sand making production line. The current management mode of the sand making industry is to separate the sand production process from the construction field, which can increase the productivity to certain extent.

How will Sand Making Machine Develop in the Future?

It’s well known that the sand making industry is moving forward in a positive direction and the sand making machine has become a new device combing both traditional and modern characteristics.
The sand making machine is considered as the most important equipment to crush and grind all kinds of soft and hard stones and minerals. It’s widely used to process minerals, cement, fire proofing, glass materials and construction materials. The high working efficiency of the sand making machine has made the equipment very popular among customers.

The sand making station has very strict standard of the productivity and the hardness of the sand starts to catch users’ attention in the construction industry. If there is no available high efficient sand making machine for customers, it’s not possible to realize the complete satisfaction of the demand for the construction sand.
For many years, the natural sand lacking problem has forced the sand making industry to take measures to change the current lagging developing situation. In addition, the requirement for a large amount of sand in the national infrastructure construction will also encourage the mining machinery industry to take further steps.
China is famous for the abundant quantity of natural resources like sand and stones which will provide enough raw materials for the sand making production line. The current management mode of the sand making industry is to separate the sand production process from the construction field, which can increase the productivity to certain extent.

Application of non-metallic mineral products

The industry of non-metallic mineral products is made up of the cement, ceramics, and glass and lime sectors. These are all traditional, well-established manufacturing sectors characterized by the transformation of naturally occurring minerals such as limestone, silica, and clays, through an energy intensive process.

During this energy-intensive process, mining machinery should be applied for the mineral materials such as limestone, clays, etc. The high performance machinery is vital for processing these mineral materials. So your wise selection is in demand. Shanghai SANME is professional manufacturer of crushing and screening equipment in China and mainly produces mining machineries such as crushers, sand making machines, washing and screening machines, etc. There are complete solutions for limestone, clays and other minerals.

Their products are used in a wide range of applications, from entirely in the construction industry in the case of cement, bricks & roof tiles, wall & floor tiles, sanitary ware and some glass products, through to consumer products like tableware and decorative goods. The operators in the industry range from global players as in the cement, flat, container and fiber glass, bricks, and to a certain extent in the lime sector, to SMEs as in most sectors of the ceramics industry and parts of the lime industry.

Artificial Sand, the Backbone of Construction Industry

Sand Maker

Artificial sand is vital in freeway construction, cement making. The natural sand available in the riverbed is very course and contains very much percentage of silt and clay which reduces the strength of the concrete and hold dampness.
The natural sand has several disadvantages compared to artificial sand. Pulled by the need of expanding domestic demand, infrastructure investment, such as roads, railways etc, is increasing.
Such large engineering project needs lots of high quality sand. However, natural sand is non-renewable resources, with the large-scale exploitation, is increasingly drying up. The natural river sand is the product of sedimentation. Mica, coal, fossils and other organic impurities are present in the river sand. In such a scenario, artificial sand is seen as a welcome alternative to natural sand.
In the process of sand making production, sand maker and crusher equipment is necessary. The raw materials mainly are granite, limestone, basalt, pebbles etc, through a series of crushing and screening equipment in order to reach required level.
Shanghai Sanme can offer a complete solution for sand production. We have the support of german high-tech machinery and full technology. There are two production lines known as dry sand making production line and wet sand making production line.