5/05/2015
Australia: Construction output to decline by an annual average of 3.5%
According to Timetric’s Construction Intelligence Centre (CIC), construction output in Australia is forecast to decline by an annual average of 3.5% over the next five years. This compares to a 5.6% annual increase in real terms over the last five-year period. Timetric’s CIC expects the country’s construction output to reach a nominal value of US$170.2 billion in 2019, down on the US$191.3 billion recorded in 2014.
The forecast contraction has been attributed to a number of factors, including: slowdown in the mining industry; less investment in the energy industry; ambiguity relating to renewable energy targets.
Although the government has announced investments in transport infrastructure, this is not expected to have a major impact on construction sector output.
On a more positive note, residential construction activity is forecast to help boost output in 2015 – 2019. Last year for example, the number of dwelling units increased by 11.9% y/y.
“Residential construction is anticipated to be the main driver of growth over the forecast period as low interest rates, migration to urban regions and the rising population are expected to drive the market’s expansion up to 2019,” explained Sina Zavertha, Economist at Timetric’s CIC.
4/22/2015
Cone crusher in crushing industry market prospect
As China economic construction is growing, make domestic real estate heat
and domestic highway high-speed development, make the development of the
industry of crusher has made great development. Cone crushers sale market is
gradually developing into the future, cone broken sales have far more than in
previous years have improved significantly.
Shanghai Sanme design production of cone crushers, the
new concept of crushing technology, to meet the different material
specifications of broken, meet the broken less grinding new process
requirements. This series of machine not only broken than the big, product fine
granularity uniform, and unit power consumption is low, the crushing material
humidity requirements are not too big requirement, also suitable for any kind
of hard brittle material, can be applied to various mineral crushing. The
machine through the large engineering proved the machine in the field of
mineral processing good application prospect. In the crusher industry
production of saving energy and reducing consumption, and high technology
content high crusher is the future crushing machinery industry a trend in the
development of.
![]() |
| cone crusher |
4/21/2015
Bauma 2016 Innovation Awards entries accepted starting
Entries are now open for the bauma Innovation Awards to be presented at the international construction and construction equipment trade fair bauma in Munich in 2016.
As last time, in 2016 the awards are again being presented in five categories:
Machinery
Components
Construction process/Construction work
Research
Design
bauma 2016 in Munich is a major international showcase for construction machinery, building material machines, mining machines, construction vehicles and construction equipment. It takes place from April 11-17, 2016 at the Messe München exhibition centre. Presentation of the awards takes place on April 10, 2016, as part of the fair’s opening ceremony.
Entries can be submitted between April 7 and August 31, 2015. Those eligible to enter are exhibitors at bauma, research institutes, research companies and members of leading associations in the German construction industry.
The awards are backed by the German Engineering Federation (VMDA), German Construction Industry Association (HDB), Central Association of the German Construction Industry (ZDB), German Building Materials Association (BBS) and bauma.
Winners in each category have shown a high practical benefit that contributes in the areas of energy and resource-efficiency or a humanisation of the workplace.
In all categories, innovations submitted must be relevant to the construction equipment, building material and mining equipment industry or to the construction industry and the building material industry.
An international jury of representatives from research, industry and the trade press nominate three innovations in each category. These are then announced at the bauma Media Dialog in Munich on January 19 and 20, 2016.
bauma in Munich, which takes place every three years, has an exhibition space of 575,000m2, making it the largest trade show in the world. In 2013, bauma broke all previous records, attracting 3,421 exhibitors from 57 countries as well as 535,065 visitors from more than 200 countries.
As last time, in 2016 the awards are again being presented in five categories:
Machinery
Components
Construction process/Construction work
Research
Design
bauma 2016 in Munich is a major international showcase for construction machinery, building material machines, mining machines, construction vehicles and construction equipment. It takes place from April 11-17, 2016 at the Messe München exhibition centre. Presentation of the awards takes place on April 10, 2016, as part of the fair’s opening ceremony.
Entries can be submitted between April 7 and August 31, 2015. Those eligible to enter are exhibitors at bauma, research institutes, research companies and members of leading associations in the German construction industry.
The awards are backed by the German Engineering Federation (VMDA), German Construction Industry Association (HDB), Central Association of the German Construction Industry (ZDB), German Building Materials Association (BBS) and bauma.
Winners in each category have shown a high practical benefit that contributes in the areas of energy and resource-efficiency or a humanisation of the workplace.
In all categories, innovations submitted must be relevant to the construction equipment, building material and mining equipment industry or to the construction industry and the building material industry.
An international jury of representatives from research, industry and the trade press nominate three innovations in each category. These are then announced at the bauma Media Dialog in Munich on January 19 and 20, 2016.
bauma in Munich, which takes place every three years, has an exhibition space of 575,000m2, making it the largest trade show in the world. In 2013, bauma broke all previous records, attracting 3,421 exhibitors from 57 countries as well as 535,065 visitors from more than 200 countries.
Growth of European construction equipment sector
During a press conference held at the international trade show for construction equipment and building technologies in Paris, Eric Lepine, President of CECE (European Construction Equipment Association), stated that “It is in a mixed market environment but with definite signs of recovery in our industry that Intermat is taking place. CECE is proud to see the sector showcasing its excellence at the Paris fair, demonstrating its readiness for new markets and opportunities”.
US-market is a bright spot for the industry
Lepine continued to state that “There are still uncertainties in different regions of the world and particularly in Europe, but the good news is that figures are telling that Europe is picking up”.
In 2014, the European construction equipment industry has already recovered to significant growth, although coming from low levels. For 2015, CECE is forecasting that the level of 2014 is to be maintained as further growth is mainly expected to come from hard-hit markets like Spain, Portugal or Italy whereas matured markets like UK, Germany or Scandinavian countries which experienced already robust growth in 2014, will likely remain stable. The outlook for France is also less impressive for 2015. Investments there have almost come to a standstill; rental companies which belong to the industry’s major customer groups, do not show promising signs of buying activities. “Looking at the longer term, 2016 should see a continued slow recovery of our industry in Europe”, predicted Mr. Lepine.
The construction equipment sector is still showing a huge disparity between several European countries but CECE believes that the gap is not getting bigger”, he said. On global terms, the bright spot for the industry is North America. As Europe is an important supplier to the USA, several companies should benefit from the positive market development.
Emissions – Stage V regulation needs to be approved by the end of 2015
To ensure the survival of the construction equipment sector and make their contribution in building a competitive and modern Europe, also in terms of technological know-how, the industry needs effective legislation that works. He referred in particular to the EU emissions legislation’s stage V that is about to come in the near future and will be the strictest exhaust emissions regulation in the world. The respective directive 97/68/EC is still under revision in Parliament and Council. Mr. Lepine pointed out that the industry has delivered significant improvements in the last few years. The construction equipment industry already produces the cleanest and safest machinery in the world and is committed to further support the legislator in this field. In order to do that, the industry needs the support of the legislator.
“We need the regulation to be approved by the end of 2015, otherwise our industry will not have the time to implement all the necessary changes in the engine and the machines to comply to these new very stringent emissions standards” said Mr. Lepine. Also, an appropriate replacement engines provision should be inserted in the new legislation.
Furthermore, CECE is requesting the legislation’s transition period to be extended by six months. CECE also sees the need for global alignment. An estimated 75% of the world however, is only at stage IIIA and below. As the global market for highly-regulated products is still small, Europe cannot allow itself to deviate too much from requirements in other ambitious nations in this field. CECE therefore urges the EU to maintain position in standards and limits with other regions, notably with the US, and actively promote worldwide alignment.
TTIP helps to secure free trade and to foster competitiveness on the global scale
This is also why CECE sees TTIP, the Transatlantic Trade and Investment Partnership, as a great opportunity for the European economy. “We support TTIP because we are for free trade and we need cooperation and harmonisation in all markets”, he pointed out. There are still tariffs that are an obstacle for free trade, like different emissions regulations, international standards like machine safety or labelling, different test procedures or access of companies to public procurement. Regulatory cooperation is by far the most important point: “When regulations are recognised on both sides we will have harmonisation in the end”, he said. And, advanced markets should be aligned. If they set common standards together they form a bigger block towards other regions and will set the pace and the standards. Free trade on both sides of the Atlantic would foster competitiveness of the industries on the global scale.
Rental companies, operators and equipment manufacturers need to join forces
A major obstacle for tree trade on the European Internal Market remains the problem of non-compliant machines coming to Europe. According to a CECE survey, one out of three companies is facing lost sales due to this. “A good market surveillance system enables a shift from unfair price competition between machines that are not complying to same standards to a fair competition based on quality amongst machines that are compliant”, said Lepine.
As resources on market surveillance are low in the member states, EU legislation must be enforced and policed. This is why CECE keeps on calling on the European Commission to keep the issue on the agenda and to improve market surveillance legislation and enforcement. The association works on the market surveillance topic in a rather practical way directly in the construction sector by making inspections at trade shows and auctions or by providing information about dangers and risks when buying non-compliant machines. CECE has also started an initiative to call on rental companies and operators to form a joint force.
US-market is a bright spot for the industry
Lepine continued to state that “There are still uncertainties in different regions of the world and particularly in Europe, but the good news is that figures are telling that Europe is picking up”.
In 2014, the European construction equipment industry has already recovered to significant growth, although coming from low levels. For 2015, CECE is forecasting that the level of 2014 is to be maintained as further growth is mainly expected to come from hard-hit markets like Spain, Portugal or Italy whereas matured markets like UK, Germany or Scandinavian countries which experienced already robust growth in 2014, will likely remain stable. The outlook for France is also less impressive for 2015. Investments there have almost come to a standstill; rental companies which belong to the industry’s major customer groups, do not show promising signs of buying activities. “Looking at the longer term, 2016 should see a continued slow recovery of our industry in Europe”, predicted Mr. Lepine.
The construction equipment sector is still showing a huge disparity between several European countries but CECE believes that the gap is not getting bigger”, he said. On global terms, the bright spot for the industry is North America. As Europe is an important supplier to the USA, several companies should benefit from the positive market development.
Emissions – Stage V regulation needs to be approved by the end of 2015
To ensure the survival of the construction equipment sector and make their contribution in building a competitive and modern Europe, also in terms of technological know-how, the industry needs effective legislation that works. He referred in particular to the EU emissions legislation’s stage V that is about to come in the near future and will be the strictest exhaust emissions regulation in the world. The respective directive 97/68/EC is still under revision in Parliament and Council. Mr. Lepine pointed out that the industry has delivered significant improvements in the last few years. The construction equipment industry already produces the cleanest and safest machinery in the world and is committed to further support the legislator in this field. In order to do that, the industry needs the support of the legislator.
“We need the regulation to be approved by the end of 2015, otherwise our industry will not have the time to implement all the necessary changes in the engine and the machines to comply to these new very stringent emissions standards” said Mr. Lepine. Also, an appropriate replacement engines provision should be inserted in the new legislation.
Furthermore, CECE is requesting the legislation’s transition period to be extended by six months. CECE also sees the need for global alignment. An estimated 75% of the world however, is only at stage IIIA and below. As the global market for highly-regulated products is still small, Europe cannot allow itself to deviate too much from requirements in other ambitious nations in this field. CECE therefore urges the EU to maintain position in standards and limits with other regions, notably with the US, and actively promote worldwide alignment.
TTIP helps to secure free trade and to foster competitiveness on the global scale
This is also why CECE sees TTIP, the Transatlantic Trade and Investment Partnership, as a great opportunity for the European economy. “We support TTIP because we are for free trade and we need cooperation and harmonisation in all markets”, he pointed out. There are still tariffs that are an obstacle for free trade, like different emissions regulations, international standards like machine safety or labelling, different test procedures or access of companies to public procurement. Regulatory cooperation is by far the most important point: “When regulations are recognised on both sides we will have harmonisation in the end”, he said. And, advanced markets should be aligned. If they set common standards together they form a bigger block towards other regions and will set the pace and the standards. Free trade on both sides of the Atlantic would foster competitiveness of the industries on the global scale.
Rental companies, operators and equipment manufacturers need to join forces
A major obstacle for tree trade on the European Internal Market remains the problem of non-compliant machines coming to Europe. According to a CECE survey, one out of three companies is facing lost sales due to this. “A good market surveillance system enables a shift from unfair price competition between machines that are not complying to same standards to a fair competition based on quality amongst machines that are compliant”, said Lepine.
As resources on market surveillance are low in the member states, EU legislation must be enforced and policed. This is why CECE keeps on calling on the European Commission to keep the issue on the agenda and to improve market surveillance legislation and enforcement. The association works on the market surveillance topic in a rather practical way directly in the construction sector by making inspections at trade shows and auctions or by providing information about dangers and risks when buying non-compliant machines. CECE has also started an initiative to call on rental companies and operators to form a joint force.
4/16/2015
Shared cement industry outlooks on development of INDC for India
At the stakeholder consultation workshop organised by the Confederation of Indian Industry (CII) for the Ministry of Environment Forests and Climate Change (MoEFCC), India’s Cement Manufactures’ Association (CMA), the apex cement industry body in the country, and the CSI joined to present the cement sector’s perspective on the development of Intended Nationally Determined Contributions (INDCs) for India.
The workshop included significant government representatives, such as:
Mr. Dipak Dasgupta, Member of the Board of Green Climate Fund (also Principal Economic Advisor, Ministry of Finance)
Mr. Ashok Lavasa, Secretary MoEFCC
Mr. Ravi Shankar Prasad, India’s Chief Climate Change Negotiator (also Joint Secretary, MoEFCC)
2015 is particularly important because of the necessary and worldwide concurrence on climate change that is to be reached during the upcoming Conference of Parties (COP) in Paris this year. Mr. Ashok Lavasa stated that climate change is not all about international negotiations, but also about ensuring sustainability through judicial use of available resources.
Mr. Sanjay Jain, Assistant Executive Director-Dalmia Bharat Group expressed his thoughts on initiatives by Indian industry to address climate change: “Even though India is the second largest cement producer in the world, its specific carbon emissions are amongst the lowest and the industry is one of the most energy efficient globally.” Mr. Ravi Shankar Prasad suggested that the various initiatives undertaken by Indian industry need to be documented and publicised to the global fraternity at the COP in Paris this year.
The Low Carbon Technology Roadmap developed by the CSI, together with its member companies in India and the International Energy Agency (IEA), with partial funding support from International Finance Corporation (IFC), was initiated by Ms. Esha Sar, Manager of CSI in India. Ms. Sar stated that there is a potential for a 45% reduction in direct CO2 emissions intensity in 2050 compared to 2010 levels, yet this would only be achievable with technology development, a supportive policy framework, and appropriate financial resources invested over the long term.
Improvements in the clinker factor, increase in the use of alternative fuels and raw materials and new technologies such as carbon capture storage and utilisation are the levers that have the maximum potential to aid carbon reductions according to Mr. Jain. Impactful projects aligned with national priorities can be framed under each of these areas and considered for Green Climate Fund support.
It was also mentioned that support for waste heat recovery projects, which are at present economically unviable due to high investment costs and lack of incentives, are a potential area for funding under the Green Climate Fund and a main lever.
The workshop included significant government representatives, such as:
Mr. Dipak Dasgupta, Member of the Board of Green Climate Fund (also Principal Economic Advisor, Ministry of Finance)
Mr. Ashok Lavasa, Secretary MoEFCC
Mr. Ravi Shankar Prasad, India’s Chief Climate Change Negotiator (also Joint Secretary, MoEFCC)
2015 is particularly important because of the necessary and worldwide concurrence on climate change that is to be reached during the upcoming Conference of Parties (COP) in Paris this year. Mr. Ashok Lavasa stated that climate change is not all about international negotiations, but also about ensuring sustainability through judicial use of available resources.
Mr. Sanjay Jain, Assistant Executive Director-Dalmia Bharat Group expressed his thoughts on initiatives by Indian industry to address climate change: “Even though India is the second largest cement producer in the world, its specific carbon emissions are amongst the lowest and the industry is one of the most energy efficient globally.” Mr. Ravi Shankar Prasad suggested that the various initiatives undertaken by Indian industry need to be documented and publicised to the global fraternity at the COP in Paris this year.
The Low Carbon Technology Roadmap developed by the CSI, together with its member companies in India and the International Energy Agency (IEA), with partial funding support from International Finance Corporation (IFC), was initiated by Ms. Esha Sar, Manager of CSI in India. Ms. Sar stated that there is a potential for a 45% reduction in direct CO2 emissions intensity in 2050 compared to 2010 levels, yet this would only be achievable with technology development, a supportive policy framework, and appropriate financial resources invested over the long term.
Improvements in the clinker factor, increase in the use of alternative fuels and raw materials and new technologies such as carbon capture storage and utilisation are the levers that have the maximum potential to aid carbon reductions according to Mr. Jain. Impactful projects aligned with national priorities can be framed under each of these areas and considered for Green Climate Fund support.
It was also mentioned that support for waste heat recovery projects, which are at present economically unviable due to high investment costs and lack of incentives, are a potential area for funding under the Green Climate Fund and a main lever.
4/15/2015
Pakistan’s cement dispatches increase in July 2014-March 2015
According to data released by All Pakistan Cement Manufacturers
Association (APCMA), in the July 2014 to March 2015 period, Pakistan’s
cement dispatches jumped 4% from 24.78 million tonnes in the same period
in 2013/2014, to 25.65 million tonnes.
Local dispatches increased 8% in the nine months under review from 18.76 million tonnes previously, to 20.22 million tonnes.
Cement exports dropped by 10% in the period under review from 6.02 million tonnes in the same period in 2013/2014, to 5.43 million tonnes.
In March 2015, local cement dispatches increased 5% year-on-year from 2.32 million tonnes in March 2014, to 2.44 million tonnes.
Exports declined by 30% from 630,000tonnes in March 2014, to 440,000tonnes.
According to regional level analysis, the southern area posted a 12% rise in March 2015 to 650,000tonnes.
The north region, however, registered a 6% drop to 2.20 million tonnes while in the south exports declined by 8% in the month under review from 190,000tonnes in 2014, to 170,000tonnes.
The north region’s exports also decreased by 40% in March 2015 from 440,000tonnes in March 2015, to 260,000tonnes.
Local dispatches increased 8% in the nine months under review from 18.76 million tonnes previously, to 20.22 million tonnes.
Cement exports dropped by 10% in the period under review from 6.02 million tonnes in the same period in 2013/2014, to 5.43 million tonnes.
In March 2015, local cement dispatches increased 5% year-on-year from 2.32 million tonnes in March 2014, to 2.44 million tonnes.
Exports declined by 30% from 630,000tonnes in March 2014, to 440,000tonnes.
According to regional level analysis, the southern area posted a 12% rise in March 2015 to 650,000tonnes.
The north region, however, registered a 6% drop to 2.20 million tonnes while in the south exports declined by 8% in the month under review from 190,000tonnes in 2014, to 170,000tonnes.
The north region’s exports also decreased by 40% in March 2015 from 440,000tonnes in March 2015, to 260,000tonnes.
Processing iron ore by crusher
The processing of iron ore is a task that involves taking the raw ore
and preparing it for use in the creation of a number of different iron
products. There are actually several different processes that may be
used to aid in this conversion of the raw ore into useful iron
components. Most processes will involve some sort of crushing and
grinding activity that results in small units that are easier to work
with in terms of creating iron bars or even preparing the iron for
smelting.
In most cases, the processing of iron ore will begin with some sort of crushing action. Different types of crushers are in common use today, including jaw crushers, impact crushers, hammer crushers, and cone crushers. Each of these types of crushing equipment are designed for use in specific situations involving the processing of iron ore. For example, hammer crushers are often used at mine sites when the yield from iron ore deposits is somewhat small.
After use of some form of crushing equipment, the processing of iron ore will usually involve grinding. Different types of grinding equipment produce everything from a fine dust to small pebbles, with the choice of grinder based on what type of further processing is involved to prepare the ore for its intended use. The grinding can sometimes occur at the site immediately after the crushing is finished, or take place in a processing plant in the event the yield from the excavation is more than can be managed with the smaller equipment designed for use at a mining site.
Once the crushing and grinding are complete, the processing of iron ore will often involve some sort of filtering action before the final product is created. Filtering equipment will help remove any other types of rocks or other impurities that were not screened out during the early processing efforts. The end result is a raw iron ore product that is ready for smelting and the manufacture of iron goods and products that can be used in a number of different applications.
The main goal for the processing of iron ore is to take the ore extracted during the mining effort, break the ore into usable units and then purify those units before the actual smelting begins. Doing so makes it easier to produce a higher grade of iron that in turn can be used to create materials for use in everything from manufacturing lawn furniture to cookware to building materials. Typically, whatever processing is done must comply with governmental regulations that set standards for the type of iron that may be used in the manufacture of specific types of goods, especially iron products used in the creation of machine components or in materials used for building construction.
In most cases, the processing of iron ore will begin with some sort of crushing action. Different types of crushers are in common use today, including jaw crushers, impact crushers, hammer crushers, and cone crushers. Each of these types of crushing equipment are designed for use in specific situations involving the processing of iron ore. For example, hammer crushers are often used at mine sites when the yield from iron ore deposits is somewhat small.
After use of some form of crushing equipment, the processing of iron ore will usually involve grinding. Different types of grinding equipment produce everything from a fine dust to small pebbles, with the choice of grinder based on what type of further processing is involved to prepare the ore for its intended use. The grinding can sometimes occur at the site immediately after the crushing is finished, or take place in a processing plant in the event the yield from the excavation is more than can be managed with the smaller equipment designed for use at a mining site.
Once the crushing and grinding are complete, the processing of iron ore will often involve some sort of filtering action before the final product is created. Filtering equipment will help remove any other types of rocks or other impurities that were not screened out during the early processing efforts. The end result is a raw iron ore product that is ready for smelting and the manufacture of iron goods and products that can be used in a number of different applications.
The main goal for the processing of iron ore is to take the ore extracted during the mining effort, break the ore into usable units and then purify those units before the actual smelting begins. Doing so makes it easier to produce a higher grade of iron that in turn can be used to create materials for use in everything from manufacturing lawn furniture to cookware to building materials. Typically, whatever processing is done must comply with governmental regulations that set standards for the type of iron that may be used in the manufacture of specific types of goods, especially iron products used in the creation of machine components or in materials used for building construction.
订阅:
博文 (Atom)

