5/07/2015

UK: Construction growth rate of new work slows in April 2015



The Markit/CIPS UK Construction Purchasing Managers’ Index® (PMI®) fell from 57.8 in March 2015 to 54.2 in April 2015. Although this is above the 50.0 no-change value, it is the lowest index figure for two years and represents two consecutive months of decline.

Of the three sub-sectors, civil engineering experienced a decline in activity for the first time in four months, while commercial construction growth was the least marked since August 2013. Residential construction performed the best. However, the rate of growth in residential construction in April was the lowest in 22 months.

The pace of new business growth also slowed. Some survey respondents partially attributed this to uncertainty surrounding tomorrow’s general election, although others said that underlying conditions remained favourable.

The rate of job creation was lower than the 2014 average, but growth ‘remained robust’. Sub-contractor availability continued to contract, contributing to an increase in sub-contractor charges.

“The general election has given the sector pause for thought as procurement and supply management professionals reported a slowdown in the pace of new construction orders growth. Though the index still remains in positive terrain, this deceleration has been attributed to project delays and hesitancy as the country prepares to vote,” commented David Noble, Group Chief Executive Officer at the Chartered Institute of Procurement and Supply (CIPS).

“Sub-contractors continue to be the winners in ongoing work, being in short supply and demanding higher rates for their labour – rising at the swiftest pace for almost 20 years. However, the sector continued to gear up and increase in-house staffing levels to meet the needs of higher levels of investment and to increase capacity and capability levels in supply chains. With this slack in new pipeline orders, suppliers were able to improve their performance as well as increase levels of stock to lighten any log jam in the supply of raw materials.”

“Though new business growth in the sector has slowed for eight months out of the last ten, business optimism is only slightly bruised and remains more solid than the average over the life of the index,” concluded Noble.

5/06/2015

The Birth of the World's First Cone Crusher



Cone crusher is most commonly used in sand production line. We have talked a lot about cone crusher, like high crushing strength, efficiency, capacity, low operating cost, easy adjustment and economic. It is widely used in metallurgical, building materials, road building, chemical and silicate industry. Today, we'll talk about the birth of first cone crusher in the world.The world's first patented cone crusher published in 1878, and products came out until 1898. Spring cone crusher is designed by Milwaukee Simmons brothers, as its name suggested. With a hundred years of history, it develops by gradual improvement, but no significant change in the basic structure. On the imitation of the Soviet Union 2100 and 1650 spring cone crusher in 1954, China produces 1200 spring cone crusher.
cone crusher
In 1958, it manufactured giant 2200 spring cone crusher. After years of tough research and practice, it overcomes the deficiencies of the old ones in spring pressure, low intensity of the part. Mass production specifications spring cone crusher is 600,900,1200,1750,2200 with 14 kinds of cavities. It has a hydraulic system to adjust the discharge hole, which effectively ensures the safe operation of the cone crusher. When something cannot be broken in the crushing chamber, the hydraulic system adjusts the dynamic cone until it is discharged, and then the movable cone back to normal.
spring cone crusher
Crushing chamber refers to the space between the movable cone and fixed cone. Shape of it great influences a lot on the overall performance. Crusher cavity is main technical indicators of cone crusher. Labyrinth seals replace the water seal in the past, so that dust can not enter the inner machine, thus ensuring clean of lubrication oil, extending the life of slide bearings and thrust ball bearing. It is convenient for new structure cone crusher replacing the broken wall. Selected high voltage displacement transducers allow discharge port position adjustment in the operating room. As long as a button, it displays on the operating table, very convenient and accurate to operate.

The cone crusher is suitable for third or fourth crushing in mining and civil engineering, medium or higher hardness ores and rocks used in building material or non-metallic area, especially areas inadequate in supply of natural sand.

Impact Crusher Has Become One of the Most Extensive Resources



In the era of low-carbon economy, to protect the environment while developing the economy is the obligatory duty for every enterprise. Thus the R&D of energy-saving and environmental protection products has become the focus for the long-term stable development of each enterprise. Energy conservation, low-carbon, environmental protection are the key to enhance the competitiveness of enterprises. Impact crusher has become the model of being green and energy-saving in the crushing equipment industry. According to relevant materials that the production of impact crusher is rising continuously, its processing materials mainly are hard ore materials, such as limestone, iron ore and other mineral materials. Therefore, it is also one of the most widely used devices in mining machinery industry.



The application of impact crushers have greatly fill the market vacancies of crushers. Compared with other crushing equipment, it has obvious advantages. Its particle size are uniform, and the particle shape is good, therefore it’s very suitable to provide materials for large construction projects. In the course of processing materials,the motor rotor mounted in the crushing chamber rotated at a high speed. It impacts the materials into the crushing chamber with a fast speed. The material under the action of a strong centrifugal force, generates forceful contacts with the panel of the cavity body. Then the materials will be rebounded to a high-speed rotating rotor again. After repeatedly breaking like this, qualified materials are discharged from the discharge port.

In order to meet the actual needs better, and keep pace with the market, our company continue to upgrade technology, improve our R&D innovations, and finally achieves larger development of crushers. These equipment has obvious advantages compared with equipment of other companies’, and they have become the most widely used devices.

5/05/2015

A new low-carbon solution for the construction sector is commercialised



Solidia Technologies, USA, and Larfarge, France, have signed an agreement to commercialise a new technology, after Solidia developed a new binder which through a different chemical reaction and at lower temperature, will generate less CO2.

It will enable a significant reduction in the environmental foot-print of precast concrete by up to 70%. It will allow lower CO2 emissions in the cement production process and use CO2 in the manufacturing of precast concrete so the Solidia Cement™ hardens through the addition and absorption of CO2.




Commercial launch will begin in markets in North America and in Europe for the manufacturing of concrete elements such as paving stones, roof tiles and concrete blocks.

Under the terms of this agreement, Lafarge will have the right to commercialise this technology worldwide. In partnership with Solidia, Lafarge will offer a complete solution (sustainable cement and CO2-cured concrete).

Australia: Construction output to decline by an annual average of 3.5%



According to Timetric’s Construction Intelligence Centre (CIC), construction output in Australia is forecast to decline by an annual average of 3.5% over the next five years. This compares to a 5.6% annual increase in real terms over the last five-year period. Timetric’s CIC expects the country’s construction output to reach a nominal value of US$170.2 billion in 2019, down on the US$191.3 billion recorded in 2014.

The forecast contraction has been attributed to a number of factors, including: slowdown in the mining industry; less investment in the energy industry; ambiguity relating to renewable energy targets.

Although the government has announced investments in transport infrastructure, this is not expected to have a major impact on construction sector output.

On a more positive note, residential construction activity is forecast to help boost output in 2015 – 2019. Last year for example, the number of dwelling units increased by 11.9% y/y.

“Residential construction is anticipated to be the main driver of growth over the forecast period as low interest rates, migration to urban regions and the rising population are expected to drive the market’s expansion up to 2019,” explained Sina Zavertha, Economist at Timetric’s CIC.

4/22/2015

Cone crusher in crushing industry market prospect


As China economic construction is growing, make domestic real estate heat and domestic highway high-speed development, make the development of the industry of crusher has made great development. Cone crushers sale market is gradually developing into the future, cone broken sales have far more than in previous years have improved significantly.

Shanghai Sanme design production of cone crushers, the new concept of crushing technology, to meet the different material specifications of broken, meet the broken less grinding new process requirements. This series of machine not only broken than the big, product fine granularity uniform, and unit power consumption is low, the crushing material humidity requirements are not too big requirement, also suitable for any kind of hard brittle material, can be applied to various mineral crushing. The machine through the large engineering proved the machine in the field of mineral processing good application prospect. In the crusher industry production of saving energy and reducing consumption, and high technology content high crusher is the future crushing machinery industry a trend in the development of.
 
cone crusher
 
Compared with the traditional crushing equipment, cone crushers as material processing of fine grinding equipment have broken than the big, product fine granularity uniform, low power consumption, can break any hardness of brittle material advantages, it is a kind of ideal energy-saving super fine crushing equipment.

4/21/2015

Bauma 2016 Innovation Awards entries accepted starting

Entries are now open for the bauma Innovation Awards to be presented at the international construction and construction equipment trade fair bauma in Munich in 2016.

As last time, in 2016 the awards are again being presented in five categories:
Machinery
Components
Construction process/Construction work
Research
Design

bauma 2016 in Munich is a major international showcase for construction machinery, building material machines, mining machines, construction vehicles and construction equipment. It takes place from April 11-17, 2016 at the Messe München exhibition centre. Presentation of the awards takes place on April 10, 2016, as part of the fair’s opening ceremony.

Entries can be submitted between April 7 and August 31, 2015. Those eligible to enter are exhibitors at bauma, research institutes, research companies and members of leading associations in the German construction industry.

The awards are backed by the German Engineering Federation (VMDA), German Construction Industry Association (HDB), Central Association of the German Construction Industry (ZDB), German Building Materials Association (BBS) and bauma.

Winners in each category have shown a high practical benefit that contributes in the areas of energy and resource-efficiency or a humanisation of the workplace.

In all categories, innovations submitted must be relevant to the construction equipment, building material and mining equipment industry or to the construction industry and the building material industry.

An international jury of representatives from research, industry and the trade press nominate three innovations in each category. These are then announced at the bauma Media Dialog in Munich on January 19 and 20, 2016.

bauma in Munich, which takes place every three years, has an exhibition space of 575,000m2, making it the largest trade show in the world. In 2013, bauma broke all previous records, attracting 3,421 exhibitors from 57 countries as well as 535,065 visitors from more than 200 countries.