5/28/2015

Cone crusher is used in the pebble hard rock ore crushing process

 


In all kinds of metal and nonmetal mineral, chemical raw materials and construction materials processing process, crushing operation consumes vast amounts of energy, and is an inefficient operations. Broken in the process, due to the operation of sound, heat, vibration and so on, make a lot of energy consumption. And the personage inside course of study for many years, from theoretical research to innovation equipment (including the reconstruction of old equipment), until change the production process, has been studying how to achieve energy saving, how to effectively complete fracture process. So if you want to transform a particular device, it must be the key of the crusher equipment have a full understanding.

 

Quarry, sand factory, metal mines and mining are used cone crusher and common ore crushing equipment such as jaw crusher, choose what kind of crusher is the most appropriate, the most economical, it must be according to the physical and chemical characteristics of ore and the position and characteristics of work place and other factors. With jaw crusher, cone crusher is suitable for crushing large rocks hardness, such as iron ore, cobble, cobble, jaw crusher is mainly used for primary crushing, large materials in the cone crusher is mainly used for broken. Cone crusher with high performance, high wear resistance, low maintenance costs, has become the main hard rock crushing equipment today.

Sanme cone crusher design with novel design principles, adopting the new concept of crushing technology, can satisfy the different material specifications of the broken, fully meet the needs of new technology of more crushing less grinding requirements. This machine not only broken than big, products fine granularity and uniformity, and the unit power consumption is low, the machine broken material humidity requirements are not too big requirements, also suitable for any hard brittle materials, can be used for a variety of minerals and broken, and the machine unique design, make the machine maintenance cost and maintenance cost greatly reduced, so that the machine production efficiency greatly improved, also has a significantly lower production cost. The machine the machine has been proved by large engineering good application prospect in the field of mineral processing.

5/27/2015

“Building energy efficiency stimulates economic activity” write UK businesses



An open letter published in The Daily Telegraph indicates many large businesses want to see the UK government’s long-term economic plan include steps to ensure building energy efficiency. The Conservative Party Manifesto pledged the Conservative government would ‘cut emissions as cost-effectively as possible’ to meet the UK’s climate change targets.

The letter, signed by 55 business leaders, argues that the construction sector offers ways to reduce carbon emissions and provide major economic growth, whilst contributing to ongoing deficit reduction and economic recovery. Organisations such as BAM Construct, Barratt Developments, E.ON, Saint-Gobain and Whitbread are among the signatories.

In the letter, the leaders write: “Building energy efficiency stimulates economic activity, strengthens our international competitiveness and creates thousands of jobs across the UK, mostly with small local businesses. It lowers costs for businesses and householders, and reduces the burden on the NHS. And as a more cost effective means of meeting demand than building new generating capacity, it is also crucial in safeguarding our energy security.”

They outline four long-term policies:
1、Recognise energy efficiency as a national infrastructure priority and allocate infrastructure funds to catalyse a national retrofit programme.
2、Deliver on the commitment for all new homes and all new non-domestic buildings to be zero carbon from 2016 and 2019 respectively.
3、Ensure that Minimum Energy Efficiency Standards for the private rented sector from 2018 are effectively enforced.
4、Outline how the government intends to meet the third and fourth carbon budgets, and introduce an ambitious fifth carbon budget.

Julie Hirigoyen, Chief Executive of the UK Green Building Council, which coordinated the letter, said: “Business leaders already recognise the importance of bold energy efficiency and carbon reduction targets – not simply because they’re the right thing to do, but because they generate real commercial value for their businesses. The new government has a golden opportunity to put cost effective carbon reductions from buildings at the heart of its economic plan. Ambitious, long-term policies would drive major economic growth and job creation, reduce energy bills for homes and businesses, and strengthen the UK’s energy security. This is a win-win-win for people, the environment and the economy.”

5/26/2015

SANME Will Attend the 48th Algiers International Fair(FIA2015)



The 48th Algiers International Fair will be held on May 27th - June 1st , 2015 at Safex PALAIS DES EXPOSITONS.



SANME, as the leading crushing and screening equipment manufacturer in China, will be present at this Fair.
Time: May 27th - June 1st , 2015
Exhibition Hall: Safex PALAIS DES EXPOSITONS
Address: PINS MARITINES-ALGER BP 366 ALGER GARE
Booth Number: U80
Participants: Bruce



Any valued customer who wants to make an appointment, please kindly email to saneme004@sanmecrusher.com or make a call to 00862158202968




5/19/2015

“Made in China 2025″ plan unveiled to boost manufacturing



China’s State Council has unveiled a ten-year national plan, Made in China 2025, designed to transform China from a manufacturing giant into a world manufacturing power.

The plan, endorsed by Premier Li Keqiang, is the country’s first action plan focusing on promoting manufacturing, a notice said on Tuesday.

The plan will be followed by another two plans in order to transform China into a leading manufacturing power by the year 2049, which marks the 100th anniversary of the founding of the People’s Republic of China.

Nine tasks have been identified as priorities: improving manufacturing innovation, integrating technology and industry, strengthening the industrial base, fostering Chinese brands, enforcing green manufacturing, promoting breakthroughs in 10 key sectors, advancing restructuring of the manufacturing sector, promoting service-oriented manufacturing and manufacturing-related service industries, and internationalizing manufacturing.

The 10 key sectors are new information technology, numerical control tools and robotics, aerospace equipment, ocean engineering equipment and high-tech ships, railway equipment, energy saving and new energy vehicles, power equipment, new materials, medicine and medical devices, and agricultural machinery.

To fulfill the tasks, “Made in China 2025″ will focus on five major projects, including establishing a manufacturing innovation center and boosting intelligent manufacturing, said the notice.

To shore up the plan, China will introduce a slew of policies to deepen institutional reforms and strengthen financial support.

The implementation of the “Made in China 2025″ plan will be market-oriented, though guided by the government, according to the notice.

Commenting on the event, Miao Wei, minister of industry and information technology (MITT), said the realization of the plan means “by 2025 … China will basically realize industrialization nearly equal to the manufacturing abilities of Germany and Japan at their early stages of industrialization.”

“There are many criteria to judge whether a country is a manufacturing power or not, including industrial scale, optimized industrial structure, sound quality and efficiency and sustainable development, but the key lies in innovation,” according to Li Beiguang, deputy head of MIIT planning division.

To promote manufacturing and national competitiveness, it is important to mobilize every conceivable element to stimulate innovation rather than simply support a single industry, said Li.

“China is being pressured from both sides,” an MIIT official who preferred to remain anonymous told Xinhua earlier this month. “Advanced economies such as the United States, Germany and Japan have all formulated policies supporting further development of their own manufacturing. At the same time, emerging economies such as India and Brazil are also catching up with their own advantages.”

Chinese manufacturing accounts for about 20 percent of the world’s total, but it is “far from strong,” according to Li Beiguang.

“Made in China 2025″ emerged as Chinese factories still struggle with decreasing demand, increasing competition from international competitors and slower economic growth.

The plan will span the whole manufacturing industry, applying advanced ideas not only from Germany and Japan, but also from the United States and Britain, among others, said officials.

Of all the projects included in the “Made in China 2025″ plan, intelligent manufacturing is crucial, according to Miao, adding that the MIIT is taking part in a three-year study on the topic.

Proposed in this year’s government work report, the “Made in China 2025″ blueprint was drafted by four ministries, including the MIIT, and submitted to the State Council weeks earlier.

UK: CPA questions ONS construction output estimates

The UK’s Office of National Statistics (ONS) has released its statistical bulletin on construction output for 1Q15 and March 2015. In the January – March 2015 quarter, the ONS estimates that construction output contracted by 1.1% q/q and by 0.3% y/y. This would make it the first quarter to experience a y/y fall in construction output since 2Q13.

In April, the ONS forecast a 1.6% q/q drop in construction output in 1Q15. The estimate has been revised up to -1.1%, based on updated survey responses.

According to the ONS, new work declined by 1.7% q/q in the first quarter of this year, with decreases also reported for total housing (-3,4%), other new work (-6.6%), and private commercial work (-3%). Repair and maintenance is estimated to have dropped by 0.2% compared to 4Q14.

In March 2015, the ONS estimates that output was 1.6% higher than in March 2014 and 3.9% higher than in February 2015.

Commenting on the estimated 1Q15 decline in construction output, Stirling Ackroyd’s Andrew Bridges said: “New homes progress has been sluggish for decades, but the latest figures show this activity actually falling. Radical measures need to be put in place to support builders. […] This impasse isn’t just limited to housing either. Infrastructure matters too – and schemes like Crossrail demonstrate how this can pay for itself with the wider benefits and increased tax take. Britain’s cities are concentrated hubs of opportunity, but they need offices, homes, schools, roads and railways. Construction isn’t some kind of aside to the main show of economic growth – it is the primary limit and the main driver of progress.”

ONS figures contested by industry

The Construction Products Association (CPA) has questioned the figures released by ONS, releasing the following statement:

‘The Office of National Statistics (ONS) today reported falls in construction output for 4Q of 2014 and 1Q of 2015, suggesting that the construction industry has technically entered recession.

The Construction Products Association points out, however, that the official data contradicts a growing body of recent evidence from itself and other industry sources. Several independent organisations, including Experian and Markit /CIPS, have similarly reported growth in construction activity. These findings were reinforced this week by the Bank of England, which published its latest Inflation Report highlighting concerns with the comparative figures.

The Construction Products Association originally wrote to the ONS to raise this issue following the release, in April, of the original 4Q estimate. The CPA and ONS met in early May, and are currently working together to address this matter.’

According to the CPA’s 1Q15 State of Trade Survey, 50% of building contractors, on balance, reported a rise in construction output compared to 1Q14. Furthermore, 54% of building contractors noted an increase in private housing output and 23%, on balance, reported y/y growth in private commercial output.

Commenting on the State of Trade Survey, Dr Diana Montgomery, CPA Chief Executive, said: “Surveys from the CPA, wider industry and independent sources indicate that the UK construction recovery appears set to continue through 2015. Despite rising costs and general election uncertainties, enquiries and orders are clearly translating into activity on the ground and contributing to steady and consistent growth.”

5/17/2015

How to deal with the dust of impact crusher?



Impact crusher is a kind of crushing equipment by the use of impact energy to crush materials in the crushing cavity. During the crushing process, it is inevitable to produce some of dust. The dust will reduces the working efficiency of the impact crusher.

As a professional crusher production enterprises, Shanghai Sanme has rich experience of dealing with crusher problems. HereShanghai Sanme share the methods to deal with the dust of impact crusher, in order to increase the service life of impact crusher.

First, in order to reduce environmental pollution, in the crushing production, we can add the right amount of water on the raw material, which can significantly reduce the dust. In addition, it is necessary to install a humidifier of dust , which can ensure the normal order of the crusher and improve the work efficiency of the crusher.

Besides, the component failure of the impact crusher not only affects normal dust, but also increase the workload of thee equipment maintenance. It needs to pay attention to the crusher maintenance to prolong its service life and reduce the dust.

5/14/2015

PPC calls for greater innovation in Africa



Alta Walker, PPC’s Head: Innovation, says that Africa’s concrete industry has huge potential, but innovation is needed to realise it.

“Africa is growing and her people are urbanising rapidly—as a result, she is constructing infrastructure at a huge rate,” says Walker. “But an opportunity of this scale also represents a massive challenge for us as an industry: we will need to think creatively about new ways of manufacturing, designing and financing our projects if we are to succeed.”

Though Africa’s potential as a continent is vast, Walker cautions that African markets are extremely diverse, and solutions will need to be tailored accordingly. Overall, a shortage of engineering and technical skills means that traditional construction methods and design practices will have to be rethought to meet the demand for housing in particular.

In addition, says Walker, meeting Africa’s needs will require innovation across the entire construction life cycle. Fundamental rethinking of this nature will be required to overcome a range of challenges, which include affordability, environmental sustainability and long implementation time frames. Africa can also benefit tremendously by adapting global solutions to local conditions.

Using innovative materials is only part of the solution, Walker emphasises. While manufacturers will have to look at ways of producing products like cement more sustainably, traditional design approaches will also need rethinking. For instance, the construction phase of any building accounts for around 15% of its total energy footprint, while 85% is produced during the life of the building. By designing for energy efficiency, however, the 15% contributed by construction can be more than offset by savings during the building’s useful life.

One of the biggest barriers to innovation is the difficulty of obtaining customer buy-in. “Changing customer perceptions will demand innovative marketing approaches,” she says. “The whole value chain will have to collaborate in innovating if we are to realise the opportunity and realise the benefits.”