The cone crusher speed up the mining mechanization

From the current economic situation analysis, more and more mines began to use mechanical work, enhance the mining rate, especially in coal, copper, zinc and other mining mechanization level has been greatly enhanced, and the industry on the quality and product molding size requirements are also constantly improved.
In addition, stone processing application field is constantly expanding, mining stone after a mechanical or manual drilling, explosive hole blasting of rock after separation, we can enter into the crushing equipment ( such as jaw crusher, impact crusher, hydraulic cone crusher,sand making machine, etc.) under different degrees of fragmentation, finally the manufactured sand, construction sand, or a variety of building stone!
In order to meet the requirements of different customers, Shanghai SANME presents four types of cone crushers which are divided into two categories, one is Hydraulic Cone Crushers which adopts advanced technologies and has high performance, including SMH Series Cone Crushers, SMS Series Cone Crushers, SMG Series Cone Crushers. The other is Symons Cone Crushers, which adopts the traditional technologies and has high cost-effective. Widely used in metallurgy industry, construction, transportation, chemical industry, and building materials industry and it is suitable for crushing hard and medium hard rocks and ores.

Cone Crusher Parts Replacement

Cone crusher crushing ratio, low energy consumption, high efficiency, and a uniform particle size, suitable for crushing and fine crushing of various ores, rocks, often used as a two and three broken broken, widely use. So, various parts of the cone crusher if damaged, how to replace it? Shanghai Sanme will introduce six parts replacement method!

(1) wall replacement cone crusher, cone crusher wall is fixed on the head with a tapered conical body and zinc alloy, new installation or replacement of a new cone crusher working 6-8 hours casting wall between the two, you should check fastening, found loose to be tightened immediately.
(2) gear, due to friction and wear of the circular plate, the impact of changes in the gear gap, to ensure the normal gear must be covered with additional pads on the bottom, the thickness should be equal to the amount of wear pads circular plate.
(3) bearings and seals, bearings when installing bowl, taking care not to damage the wire rope slinger (physical support between the rope with hardwood, etc.). When assembled, the spherical bearing should be scraping the bowl to ensure the crushing cone and outer contact each other in the inner sphere should ensure that the annular gap 0.35-0.5mm. Nail bowl around the bush with Pakistan-based alloys perfusion fixed bowl bearing shelves to prevent what bowl bearing the circumferential direction of rotation.
Bowl bearing frame and body with the key (pin) fixed, if found in the work bowl bearing frame and body clearance must be treated immediately.
(4) conical bushings, air eccentric shaft sleeve and fit to be strict, in order to prevent the injection of zinc alloy rotating sleeve, zinc alloy to be filled with all the space, due to the reason of zinc alloy thermal injection may cause deformation of the sleeve, so the new set the size of the cone of inspection, found to be incorrect promptly corrected, manufacturing spare parts shall be the actual size of the inside diameter of the eccentric formulated to maintain the original tie.
(5) of the cylindrical body of the bush and the frame for the third transition fit, in order to prevent rotation of the bush, and in the upper part of the tank into the bush zinc alloy, should be replaced with new bushings when the actual size of the frame body preparation, because the crusher after a long work and will inevitably lead to changes in handling relations with. If the gap is too great cause rupture bush.
(6) of the spring, the spring is when the crusher into the not-broken when protecting the crusher is not damaged, so the crushing force of the spring pressure and adapt crusher, crusher spring during normal operation is not moving, just fall crusher iron overload lift support sleeve when the spring is compressed phenomenon occurs in the crushing chamber.

Routine Maintenance Of the Cone Crusher

Any equipment will be wear and tear occurs with used for a long time, cone crusher is no exception. Because of non-stop work , cone crusher wear time and the material accumulated to a certain extent , there will be some equipment wear, may result in lower yields , or the material is not an ideal situation, then you need to replace the cone crusher accessories.

Therefore , when we use the cone crusher , to regularly carry out regular inspections of equipment, accessories , case can not be used due to cone crusher wear parts , resulting in a greater degree of damage to the machine .

Sanme remind you , cone crusher parts maintenance work is very important , can cause damage to some parts of the machine further damage , and may even unusable. For example, SMS multi-cylinder hydraulic cone crusher, hydraulic system damage if one component is not replaced in time , it may cause the entire hydraulic system is not working properly, it will affect production, but will also bring the loss of interest. In addition , such type of spring cone crusher and so on , but also do inspection, maintenance , especially after a period of time to look at the spring there is no need to replace the gasket .

Cone crusher crushing wall using new composite materials forged a cost-effective , super wear-resistant, wide applications and so on. After a new installation or a new replacement cone crusher wall work six to eight hours , you should check their retention , should be immediately found loose fastening , cone crusher to avoid unnecessary damage .

Cone crusher machine using the machine lies maintenance, so the machine will work for you longer , but your interest is to get the corresponding reward.